DC Mini Bike 4 m - 13 feet

 TECHNICAL DATA

• Small, lightweight and powerful
• Extremely flexible in 45° and 90° bends
• Cuts, mills, and grinds in all materials
• User friendly
• Precise control
• Toolbox standard accessory

Operation

DC MINI BIKE is operated using a “bicycle handlebar” which gives you complete control of the cutters movements.

When turning the handlebar and operating the handles, the cutter turns sideways, up and down. You completely control the work process, no matter if the cutter has to fit through one or more bends in a narrow pipe.

• DC MINI BIKE is extremely flexible and easily manoeuvres through one 45° bend in a 50 mm / 2” pipe and through several 90° bends in a 75 mm / 3” diameter pipe.
• DC MINI BIKE comes with a supply hose in your preferred length, from 1 to 15 meters (3’ ft. 3” – 49´ ft. 2,5”).
• The cutter is equipped with an air grinder which is actuated by a valve, that is also attached to the handlebar.

Maintenance

The DC MINI BIKE comes with an oil lubricator and water separator. We recommend always having a refrigerated dryer mounted on the compressor, to minimise the water content of the air, so it never exceeds 20 g/m3. The DC MINI BIKE operates at maximum efficiency in clean, dry air and this also prolongs the cutter’s service life.

• Compare this item